05.01
iv
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
An overview of publications that is updated monthly is provided in a number of
languages in the Internet under the following address:
http://www.siemens.com/motioncontrol
Select the menu items ––> ”Support” ––> ”Technical Documentation” ––>
”Ordering Documentation” ––> “Printed Documentation”.
The Internet version of DOConCD (DOConWEB) is available at:
http://www.automation.siemens.com/doconweb
You will find the certificates for the products described in this documentation in
the Internet: http://www.support.automation.siemens.com
under the Product/Order No. 15257461
or contact the relevant branch office of the A&D MC group of Siemens AG.
All declarations of conformity and certificates such as CE, UL, etc., are per-
formed with the system components described in the associated Configuration
Manuals or catalogs and, thus, are only valid if the described components are
used in the device or facility.
Note
The use of components not released by Siemens may require the user to
prepare new certificates/declarations of conformity.
Note
Repairs may be performed only by workshops authorized by Siemens who
must use genuine spare parts. Unauthorized repairs and the use of other spare
parts can result in personal injuries and property damage as well as loss of UL
approvals and safety functions, such as Safety Integrated.
!
Warning
SIMODRIVE converters are used in high voltage installations and are operated
at voltages that when touched can cause serious injuries or death!
Note the following:
!
Warning
This device may only be used as described in the catalog and in the technical
description and only in connection with third–party devices and components
recommended or approved by Siemens. To ensure trouble–free and safe
operation of the product, it must be transported, stored and installed as
intended and maintained and operated with care.
Current
documentation
Certificates
Repairs
Proper use
Forword 05.08
To Next Page
Loading...
