1
1.3 ”SIMODRIVE 611 universal” control board
1-32
Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
1.3 ”SIMODRIVE 611 universal” control board
The ”SIMODRIVE 611 universal” control board is used in the
SIMODRIVE 611 system, and it can be expanded using the optional
TERMINALS or PROFIBUS–DP module.
The control board has the following features:
Versions
Table 1-2 Control board, option modules, data medium
Cons
Description Order No. (MLFB)
Hardware Firmware
Control board
1 n–set 6SN1118–0NH00–0AA
2)6)
2–axis
1)
for encoders
6SN1118–0NH01–0AA0
7)
2
with sin/cos 1 Vpp or
TTL signals
9)
Positioning 6SN1118–1NH00–0AA
2)6)
6SN1118–1NH01–0AA0
7)
3 n–set 6SN1118–0NK00–0AA
2)6)
4
6SN1118–0NK01–0AA0
8)
5
Positioning 6SN1118–1NK00–0AA
2)6)
6 6SN1118–1NK01–0AA0
8)
7 n–set 6SN1118–0NJ00–0AA
2)6)
8
6SN1118–0NJ01–0AA0
8)
9
Positioning 6SN1118–1NJ00–0AA
2)6)
10 6SN1118–1NJ01–0AA0
8)
Option module (can be alternatively used in the control board)
1 TERMINALS – 6SN1114–0NA00–0AA0
2 PROFIBUS–DP1
3)
– 6SN1114–0NB00–0AA0
3 PROFIBUS–DP2
4)
– 6SN1114–0NB00–0AA1
4 PROFIBUS–DP3
4)
– 6SN1114–0NB01–0AA0
Data medium
1 CD SimoCom U,
drive firmware,
Toolbox, GSD
file,
readme file,
etc.
6SN1153–NX20–AG0
5)
= 0 ––> CD with the most
current SW version
The CD also contains pre-
vious SW versions
1) For 2–axis control boards, 1–axis operation is also possible
2) : Space retainer for the hardware version
3) Can no longer be used from SW 4.1
4) Prerequisites: Control board from SW 3.1
5) : Space retainer for the software version
6) ”SIMODRIVE 611 universal” control board
7) ”SIMODRIVE 611 universal HR” control board from SW 5.1
8) ”SIMODRIVE 611 universal HR” control board from SW 6.2
9) With control board, Order No. 6SN1118–NH01–0AA from SW 8.1
Description
Features
06.04