6
6.1 Operating mode, speed/torque setpoint (P0700 = 1)
6-333
Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Reader’s note
Described in the following:
Ramp–function generator
Optimizing the current and speed controllers
Speed controller adaptation
All additional parameters to optimize the current and speed control
loop can be adapted using the expert list.
Detailed information regarding the current and speed control loop are
included in:
Reference: /FBA/ SIMODRIVE 611D/SINUMERIK 840D/810D
Description of Functions, Drive Functions
6 Description of the Functions
To Next Page
Loading...
