Siemens SIMODRIVE 611 universal - Page 398

6
6.2 Positioning mode (P0700 = 3, from SW 2.1)
6-398
 Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
The following parameters are available for ”referencing with distance–
coded measuring system” function:
 P0161 Stopping at marks (from SW 8.3)
 P0173 Reference point approach without reference cams
 P1027 IM configuration, encoder
 P1037 DM configuration encoder
 P1050 IM reference mark distance for distance–coded
scales
 P1051 IM reference mark distance for distance–coded
rotary encoders
 P1052 DM reference mark distance for distance–coded
scales
 P1053 DM reference mark distance for distance–coded
rotary encoders
 P1054 IM difference for distance–coded rotary encoders
(from SW 8.3)
 P1055 DM difference for distance–coded rotary encoders
(from SW 8.3)
Parameter
overview
(refer to 6.2.8 and
A.1)
6 Description of the Functions
01.99
! not 611ue !
04.05