Siemens SIMODRIVE 611 universal - A.4 Encoder list

A
A.4 Encoder list
A-885
 Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
A.4 Encoder list
A.4.1 Encoder code
The motor encoder being used is identified by its encoder code in
P1006.
If encoder systems are used, which are not marketed by SIEMENS
(third–party encoder, encoder code = 99), then additional parameters
must be ”manually” set corresponding to the measuring system
manufacturer’s data (refer to Table A-12).
A Lists
01.99