Description of the motor
2.3 Technical features and ambient conditions
1FW6 Built-in torque motors
36 Configuration Manual, 07/2017, 6SN1197-0AE00-0BP9
Defining the direction of rotation
Direction of rotation
If the built-in torque motor is connected with a phase sequence U-V-W, and is fed from a
three-phase system with a clockwise phase sequence, then the rotor rotates clockwise. You
can identify the direction of rotation by viewing the DE of the built-in torque motor. The cable
outlet of the built-in torque motor is on the opposite side – the NDE.
Figure 2-3 Line of sight for determining the direction of rotation
Environmental conditions for stationary use
You can classify the ambient conditions for stationary use at weatherprotected locations
according to the standard DIN IEC 60721-3-3. The environmental effects and their limit
values are defined in various classes in this standard.
With the exception of "Low air temperature" and "Low air pressure" ambient parameters, you
can assign the motors to climatic class 3K3.
To Next Page
Loading...
Need help?
General