Basic functions
7.30 Web server
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
455
Deleting entries from the parameter list
1. In the “List name" drop-down list, select the parameter list from which you want to delete
selected list elements (lines).
2. Click the "DEL" button in the parameter list in front of the line that you want to delete.
Figure 7-41 Drive parameters - deleting an individual list
If you have the required change rights for this parameter list, the line is deleted. You can
delete further list elements in the same way. After deleting all the required list elements,
the parameter list must be saved.
3. Click on the “Save list” button.
To Next Page
Loading...
