Siemens SINAMICS S120 - Page 758

Communication
11.1 Communication according to PROFIdrive
Drive functions
758 Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Error
value
Meaning
Remark
Additional
info
0x71 Parameter %s [%s]: Write access
only in the ready mode (p0010 = 0).
– –
0x72 Parameter %s [%s]: Write access
only in the commissioning state,
parameter reset (p0010 = 30).
– –
0x73 Parameter %s [%s]: Write access
only in the commissioning state,
Safety (p0010 = 95).
– –
0x74 Parameter %s [%s]: Write access
only in the commissioning state, tech.
application/units (p0010 = 5).
– –
0x75 Parameter %s [%s]: Write access
only in the commissioning state
(p0010 not equal to 0).
– –
0x76 Parameter %s [%s]: Write access
only in the commissioning state,
download (p0010 = 29).
– –
0x77 Parameter %s [%s] must not be writ-
ten during download.
– –
0x78 Parameter %s [%s]: Write access
only in the commissioning state, drive
configuration (device: p0009 = 3).
– –
0x79 Parameter %s [%s]: Write access
only in the commissioning state,
define drive type (device: p0009 = 2).
– –
0x7A Parameter %s [%s]: Write access
only in the commissioning state, data
record base configuration (de-
vice: p0009 = 4).
– –
0x7B Parameter %s [%s]: Write access
only in the commissioning state,
device configuration (de-
vice: p0009 = 1).
– –
0x7C Parameter %s [%s]: Write access
only in the commissioning state,
device download (de-
vice: p0009 = 29).
– –
0x7D Parameter %s [%s]: Write access
only in the commissioning state,
device parameter reset (de-
vice: p0009 = 30).
– –
0x7E Parameter %s [%s]: Write access
only in the commissioning state,
device ready (device: p0009 = 0).
– –
0x7F Parameter %s [%s]: Write access
only in the commissioning state,
device (device: p0009 not equal to 0).
– –
0x81 Parameter %s [%s] must not be writ-
ten during download.
– –