08/2005 Starting Up HMI Embedded (IM2)
4 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
IM2/4-47
//* Name of channel area 3 and names of channels of channel
area 3 */
3080210 "" //2x9 T_CHAN_AREA_3
3080211 "" //2x9 T_CHAN_AREA_3_CHANNEL_1
3080212 "" //2x9 T_CHAN_AREA_3_CHANNEL_2
3080213 "" //2x9 T_CHAN_AREA_3_CHANNEL_3
3080214 "" //2x9 T_CHAN_AREA_3_CHANNEL_4
3080215 "" //2x9 T_CHAN_AREA_3_CHANNEL_5
3080216 "" //2x9 T_CHAN_AREA_3_CHANNEL_6
3080217 "" //2x9 T_CHAN_AREA_3_CHANNEL_7
3080218 "" //2x9 T_CHAN_AREA_3_CHANNEL_8
//* Name of channel area 4 and names of channels of channel
area 4 */
3080219 "" //2x9 T_CHAN_AREA_4
3080220 "" //2x9 T_CHAN_AREA_4_CHANNEL_1
3080221 "" //2x9 T_CHAN_AREA_4_CHANNEL_2
3080222 "" //2x9 T_CHAN_AREA_4_CHANNEL_3
3080223 "" //2x9 T_CHAN_AREA_4_CHANNEL_4
3080224 "" //2x9 T_CHAN_AREA_4_CHANNEL_5
3080225 "" //2x9 T_CHAN_AREA_4_CHANNEL_6
3080226 "" //2x9 T_CHAN_AREA_4_CHANNEL_7
3080227 "" //2x9 T_CHAN_AREA_4_CHANNEL_8
//* Name of channel area 5 and names of channels of channel
area 5 */
3080228 "" //2x9 T_CHAN_AREA_5
3080229 "" //2x9 T_CHAN_AREA_5_CHANNEL_1
3080230 "" //2x9 T_CHAN_AREA_5_CHANNEL_2
3080231 "" //2x9 T_CHAN_AREA_5_CHANNEL_3
3080232 "" //2x9 T_CHAN_AREA_5_CHANNEL_4
3080233 "" //2x9 T_CHAN_AREA_5_CHANNEL_5
3080234 "" //2x9 T_CHAN_AREA_5_CHANNEL_6
3080235 "" //2x9 T_CHAN_AREA_5_CHANNEL_7
3080236 "" //2x9 T_CHAN_AREA_5_CHANNEL_8
//* Name of channel area 6 and names of channels of channel
area 6 */
3080237 "" //2x9 T_CHAN_AREA_6
3080238 "" //2x9 T_CHAN_AREA_6_CHANNEL_1
3080239 "" //2x9 T_CHAN_AREA_6_CHANNEL_2
3080240 "" //2x9 T_CHAN_AREA_6_CHANNEL_3
3080241 "" //2x9 T_CHAN_AREA_6_CHANNEL_4
3080242 "" //2x9 T_CHAN_AREA_6_CHANNEL_5
3080243 "" //2x9 T_CHAN_AREA_6_CHANNEL_6
3080244 "" //2x9 T_CHAN_AREA_6_CHANNEL_7
3080245 "" //2x9 T_CHAN_AREA_6_CHANNEL_8
To Next Page
Loading...
Need help?
General
