Starting Up HMI Embedded (IM2) 08/2005
4 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM2/4-46 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Foreign language texts
In particular for the channel menu, the "chan.txt" file is available in several
language variants that are stored language-dependent in the text directories
e.g. for German text at: card/user/sinumerik/hmi/lng/deu",
for English text at: card/user/sinumerik/hmi/lng/eng, etc.
The content of "chan.txt" files, which do not yet contain any texts, is as follows.
Example:
// CP = 1252
// IDEO = NO
// ANSI = YES
// UNICODE = NO
// VERSION = $VERSION
[SWITCHES]/NATIVE
File with OEM name specifications for channel-areas and
channels
//* Lengths of softkey text 2 * 9 characters */
//* For next line use %n in the string */
//* You must not change any number but only insert the texts!
*/
//* Text-definitions for softkeys in channel-switch-menu */
//* Name of channel area 1 and names of channels of channel
area 1 */
3080193 "NCU_1" //2x9 T_CHAN_AREA_1
3080194 "CHANNEL_1" //2x9 T_CHAN_AREA_1_CHANNEL_1
3080195 "CHANNEL_2" //2x9 T_CHAN_AREA_1_CHANNEL_2
3080196 "CHANNEL_3" //2x9 T_CHAN_AREA_1_CHANNEL_3
3080197 "" //2x9 T_CHAN_AREA_1_CHANNEL_4
3080198 "" //2x9 T_CHAN_AREA_1_CHANNEL_5
3080199 "" //2x9 T_CHAN_AREA_1_CHANNEL_6
3080200 "" //2x9 T_CHAN_AREA_1_CHANNEL_7
3080201 "" //2x9 T_CHAN_AREA_1_CHANNEL_8
//* Name of channel area 2 and names of channels of channel
area 2 */
3080202 "" //2x9 T_CHAN_AREA_2
3080203 "" //2x9 T_CHAN_AREA_2_CHANNEL_1
3080204 "" //2x9 T_CHAN_AREA_2_CHANNEL_2
3080205 "" //2x9 T_CHAN_AREA_1_CHANNEL_3
3080206 "" //2x9 T_CHAN_AREA_2_CHANNEL_4
3080207 "" //2x9 T_CHAN_AREA_2_CHANNEL_6
3080208 "" //2x9 T_CHAN_AREA_2_CHANNEL_7
3080209 "" //2x9 T_CHAN_AREA_2_CHANNEL_8
To Next Page
Loading...
Need help?
General
