protection device is entered. The server address of the device, which is its homepage address, is transmitted to
the browser and displayed as an HTML page. This TCP-IP address is set at the front and service interface using
DIGSI 4, or directly on the device using the integrated operator interface.
NOTE
It is only possible to monitor this process. Control of the process through the data transmission link is only
possible after a control feature has been set up and established. A parameter can be modified either
directly on the device or with DIGSI 4 in such manner that the device control feature contained in the Web
Monitor also permits the input of numerical values. Thereafter, the Web Monitor parameters can be modi-
fied which are normally set only directly on the device, because passwords can now be entered from the
keyboard.
Functions
Basic Functionality
Basic functionality means the functions that are generally available, i.e. not device-dependent.
These comprise:
•
Device Control
•
Messages
•
Fault Records
•
Measurement Overview
•
Diagnostics
•
Device File System
•
CFC
A description of these functions is provided in the Online Help of DIGSI as from Version V4.60.
[sj61-web-grundbild, 1, en_US]
Figure 2-80 Web-Monitor Default Display
The above figure of the device operation view shows a device connected through the data transmission link
with its control (keyboard) and display elements (display, LEDs, inscriptions). The device can be operated with
the keys shown in the display in the same way as with the sealed keypad on the device.
It is recommended to block the control via the Web Monitor. This can be achieved by setting "Read Only"-
access for the interface via which the Web browser accesses the device. This parameter can be accessed in
DIGSI via "Interfaces - Operator Interface on Device" (for access via serial interface) or via "Interfaces - Ethernet
on Device" (for access via the Ethernet interface, see the following figure).
2.17.9.2
Functions
2.17 Auxiliary Functions
214 SIPROTEC 4, 7SJ61, Manual
C53000-G1140-C210-6, Edition 05.2016
To Next Page
Loading...
