Siemens SIPROTEC 4 7SJ61 - Switching Device Control

Switching Device Control
Number of Controlled Switching Devices Depends on the number of binary inputs and outputs
available
Interlocking Freely programmable interlocking
Messages Single command / double command
Control Commands Single command / double command
Switching Command to Circuit Breaker 1-, 1½ - and 2-pole
Programmable Logic Controller PLC logic, graphic input tool
Local Control Control via menu control
assignment of function keys
Remote Control Using Communication Interfaces
Using a substation automation and control system (e.g.
SICAM)
Using DIGSI (e.g. via Modem)
4.21
Technical Data
4.21 Switching Device Control
340 SIPROTEC 4, 7SJ61, Manual
C53000-G1140-C210-6, Edition 05.2016