Pickup Voltage of BI4 to BI11
Table 3-10 Jumper settings for pickup voltages of binary inputs BI4 to BI11 on the input/output board A–
I/O-2 up to 7SJ61.../EE
Binary inputs Jumper
DC 19 V threshold
1)
DC 88 V threshold
3)
BI4 X21 L H
BI5 X22 L H
BI6 X23 L H
BI7 X24 L H
BI8 X25 L H
BI9 X26 L H
BI10 X27 L H
BI11 X28 L H
1)
Factory settings for devices with power supply voltages of DC 24 V to 125 V
2)
Factory settings for devices with power supply voltages of DC 110 V to 220 V and AC 115 V/ 230 V
Mounting and Commissioning
3.1 Mounting and Connections
248 SIPROTEC 4, 7SJ61, Manual
C53000-G1140-C210-6, Edition 05.2016
To Next Page
Loading...
