EasyManua.ls Logo

Siemens SIPROTEC 4 7SJ61 - Page 283

Siemens SIPROTEC 4 7SJ61
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connection for flush-mounted
casing
Rear panel, mounting location “C”
Connection for surface-mounted
casing
at the housing mounted case on the case bottom
Optical Wavelength λ = 820 nm
Laser Class 1 according to EN
60825-1/-2
using glass fiber 50/125 μm or using glass fiber 62.5/125 μm
Permissible Optical Link Signal
Attenuation
max. 8 dB, with glass fiber 62.5/125 μm
Maximum Distance of Transmission max. 0.93 miles (1.5 km)
Character Idle State Configurable: factory setting “Light off”
System Interface
IEC 60870-5-103 single
RS232/RS485/FO according to the
ordering variant
isolated interface for data transfer to a master terminal
RS232
Connection for flush-mounted
casing
rear panel, mounting location “B”,
9-pole D-SUB miniature female connector
Connection for surface-mounted
casing
at the housing mounted case on the case bottom
Test Voltage (PELV) 500 V; 50 Hz
Transmission Speed min. 1,200 baud, max. 115,200 baud; Factory setting 9,600 baud
Maximum Distance of Transmission 49.2 feet (15 m)
RS485
Connection for flush-mounted
casing
rear panel, mounting location “B”,
9-pole D-SUB miniature female connector
Connection for surface-mounted
casing
at the housing mounted case on the case bottom
Test Voltage (PELV) 500 V; 50 Hz
Transmission Speed min. 1,200 baud, max. 115,200 baud; Factory setting 9,600 baud
Maximum Distance of Transmission max. 0.62 miles (1 km)
Fiber Optical Link (FO)
FO connector type ST connector
Connection for flush-mounted
casing
Rear panel, mounting location “B”
Connection for surface-mounted
casing
at the housing mounted case on the case bottom
Optical Wavelength λ = 820 nm
Laser Class 1 according to EN
60825-1/-2
using glass fiber 50/12 μm or using glass fiber 62.5/125 μm
Permissible Optical Link Signal
Attenuation
max. 8 dB, with glass fiber 62.5/125 μm
Transmission Speed min. 1,200 baud, max. 115,200 baud; Factory setting 9,600 Bd
Maximum Distance of Transmission max. 0.93 miles (1.5 km)
Character Idle State Configurable: factory setting “Light off”
Technical Data
4.1 General Device Data
SIPROTEC 4, 7SJ61, Manual 283
C53000-G1140-C210-6, Edition 05.2016

Table of Contents

Related product manuals