Siemens SITOP UPS1100 - Page 116

Engineering and remote access
3.6 Cyclic and acyclic data
SITOP UPS1600 / BAT1600 / UPS1100
116 Equipment Manual, 07.2021, A5E37775406-11-76
Data
Description
Data type
CommandID
Output ON/OFF: 8200
Unsigned16
Parameter 1
0
Unsigned8
Parameter 2
0: output OFF
1: output ON
Unsigned8
Data
Description
Data type
CommandID
Reset to Factory Values: 8209
Unsigned16
Parameter 1
Not used
Unsigned8
Parameter 2
Not used
>= V2.1.0
Unsigned8
Data
Description
Data type
CommandID
Shutdown: 8194
Unsigned16
Parameter 1
Not used
Unsigned8
Parameter 2
Not used
Unsigned8
0x0010: Result of DC-UPS command (reading)
Data
Description
Data type
CommandID
CommandID (of the previously sent command)
Unsigned16
Parameter 1
0: OK
> 0: Error
Unsigned16
0x0011: Battery 1 information parameters (reading)
Data
Description
Data type
Number of batteries
Number of connected batteries
Unsigned8 from
V2.2
Battery 1 available
0 ... not available 1 ... available
Unsigned8 from
V2.2
Minimal temperature
Minimal temperature
Signed8 from
V2.2
Maximal temperature
Maximal temperature
Signed8 from
V2.2
Standby time
Standby time
Unsigned32
from V2.2
Buffer time
Buffer time
Unsigned32
from V2.2
Total charging current
Total charging current
Unsigned32
from V2.2
Total culled current
Total culled current
Unsigned32
from V2.2