Siemens SITOP UPS1100 - Page 117

Engineering and remote access
3.6 Cyclic and acyclic data
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
117
Data
Description
Data type
EOCV
End-of-charge voltage
Unsigned16
from V2.2
Charge current
Charge current
Unsigned16
from V2.2
Battery capacity
Battery capacity
Unsigned16
from V2.2
Stop buffering voltage
Stop buffering voltage
Unsigned16
from V2.2
Battery type
Battery type
Unsigned8 from
V2.2
Fill byte(s)
-
1 x Unsigned8
Order number
Order number
VisibleString(20)
from V2.2
Serial number
Serial number
VisibleString(16)
from V2.2
Manufacturing date
Manufacturing date
3 × Unsigned8
from V2.2
Version number
Version number (SW / HW)
2 × Unsigned8
from V2.2
Calculated battery health
Calculated battery health
Unsigned8
Operating state
Operating state
Unsigned8
LED state
LED states
Unsigned8
Fill byte(s)
-
2 x Unsigned8
SWD
SW revision
Unsigned32
Battery MID
Battery Module Ident Number
Unsigned32
0x0012: Battery 2 information parameters (reading)
Data
Description
Data type
Number of batteries
Number of connected batteries
Unsigned8 from
V2.2
Battery 2 available
0 ... not available 2 ... available
Unsigned8 from
V2.2
Minimal temperature
Minimal temperature
Signed8 from
V2.2
Maximal temperature
Maximal temperature
Signed8 from
V2.2
Standby time
Standby time
Unsigned32
from V2.2
Buffer time
Buffer time
Unsigned32
from V2.2
Total charging current
Total charging current
Unsigned32
from V2.2
Total culled current
Total culled current
Unsigned32
from V2.2
EOCV
End-of-charge voltage
Unsigned16
from V2.2
Charge current
Charge current
Unsigned16
from V2.2