Siemens SITOP UPS1100 - Page 184

Troubleshooting
SITOP UPS1600 / BAT1600 / UPS1100
184 Equipment Manual, 07.2021, A5E37775406-11-76
Error
Type
Ex-
tend-
ed
Error
Type
Severity Alarm Text Help Text
258
6
N
New battery detected (bat-
tery index: {1:d})
A new battery was connected. The battery will be included in
the calculation of the total capacity and the charge parameters.
258
7
MD
Wrong battery configuration
(battery index: {1:d})
Different battery types connected. Only batteries of the same
type can be operated together.
258
8
MD
Battery parameters corrupt
(battery index: {1:d}).
Battery defective - replace battery
Remark:
Alarm is deactivated.
258
9
MR
Battery replacement started
(battery index: {1:d})
Battery replacement started by user
258
10
MR
Battery replacement finished
(battery index: {1:d})
Battery replacement finished - counters have been reset
258
11
MD
Battery replacement can-
celed (battery index: {1:d})
Battery replacement canceled - battery parameters are not
reset
258
12
MD
Fuse is defective (battery
index: {1:d})
Fuse is defective.
258
13
MD
Battery test negative
The battery test ended with a negative result.
258
14
N
Battery replacement rec-
ommended (battery index:
{1:d})
End of lifetime approaching
258
15
MR
Battery replacement rec-
ommended (battery index:
{1:d})
End of lifetime reached
258
16
MR
Incompatible module de-
tected (battery index: {1:d})
Incompatible module detected
258
17
MR
Module with reduced power
detected (battery index:
{1:d})
A module with reduced power was detected. Deviating system
behavior may be possible.
258
18
Battery module with exces-
sive power detected (battery
index: {1:d})
A module with excessive power was detected. Normal opera-
tion of the system is possible.
258
19
Unexpected module type
detected (battery index:
{1:d})
Unexpected module type detected
Note
Separated according to priority levels, the number of active alarms can be called using the PN
data sets listed below.
F: 0x800B
MD: 0x8013
MR: 0x8012