Diagnosing with PDM
Access the device status via [Diagnostic → Device Status].
Online process values are available under menu [View → Display].
The Measured Track Values tab shows the gain steps and the flow velocities for path 1 and path
2. For 1-path applications the values for path 2 (track 2) are 0.
The gain steps depend on the pipe size and the conditions of the measuring media.
The flow velocities depend on the flow in the pipe.
Troubleshooting/FAQs
9.2 Diagnosing with PDM
SITRANS FUS380/FUE380
Operating Instructions, 05/2018, A5E00730100-AE 83
To Next Page
Loading...
