Changes to system layout and products
Changes to the system and to individual products may result in faults and incorrect
functioning. Request from us and the respective safety authorities written approval
for intended changes and system expansions.
Components and replacement parts
Components and replacement parts procured locally must comply with the
technical requirements defined by the manufacturer. This is ensured in the case
of OEM replacement parts supplied by us.
Use only fuses having the prescribed characteristics.
Incorrect battery types and improper exchange of batteries result in an explosion
hazard. Use only the same battery type or an equivalent type recommended by
us.
Batteries require environmentally appropriate disposal. Bring them to the local
collection centers.
Note that the cylinders containing the extinguishing agent are under pressure
and must be exchanged in accordance with local safety regulations.
Non-compliance with safety regulations
The products are designed for proper use and have been tested for correct
function prior to delivery. We accept no liability for personal injury or property
damage occurring as the result of abuse or by noncompliance with the instructions
or danger notices listed in the documentation. This applies especially to:
Personal injury or property damage that occurs as the result of inappropriate use
and incorrect use.
Personal injuries or property damage that occurs as the result of non-
compliance with safety-relevant information in the documentation or on the
product.
Personal injury or property damage that occurs as the result of deficiently
performed or non-performance of maintenance.
To Next Page
Loading...
