Programming the user functions
80
Building Technologies
A6V10099837_a_en
Fire Safety & Security Products 12.2007
11.6.5 Step 5, change the active mode of control lines 1 and 3
Change the active mode of control line 1
Zone 1 Zone 2
Zone 3 Zone 4
Select Option Function
Red
1 (default)
State "Fire alarm" = continuous –
2 State "Fire alarm" = pulsating slow (1sec active/4sec inactive)
3 State "Fire alarm" = not activated
4 State "Fire alarm" = pulsating fast (1sec active/1sec inactive)
5 (default)
State "Activated" = pulsating fast and pulsating slow in state
"Emergency hold/abort"
–
6 State "Activated" = continuous
7
State "Activated" = continuous and pulsating slow in state
"Emergency hold"
KEY13
▼
8
State "Activated" = pulsating long (4sec active/1sec inactive) and
pulsating fast in state "Emergency hold/abort"
9 (default)
State "Released" = pulsating fast –
KEY14
▼
10 State "Released" = continuous
Change the active period of control line 1
Zone 1
Zone 2
Zone 3 Zone 4
Select Option Function
Red
Active until "Silence Re-sound horn" and "Reset" –
12 Active until "Reset"
13
Active until "Silence Re-sound horn" and "Reset" but only after timer
of 5 min has elapsed
KEY14
▼
14
Active until "Silence Re-sound horn" and "Reset" but only after timer
of 30 min has elapsed
Change the active mode and active period of control line 3
Zone 1 Zone 2
Zone 3 Zone 4
Select Option Function
Red
State "Fire alarm" = not activated –
16 State "Fire alarm" = continuous
17 State "Fire alarm" = pulsating fast
State "Activated" = continuous –
KEY15
▼
19 State "Activated" = pulsating fast
State "Released" = continuous until "Reset" – –
21
State "Released" = continuous until "Silence Re-sound horn" or
"Reset"
–
22
State "Released" = continuous until "Digit key 4" is pressed after
"Reset"
–
23 State "Released" = pulsating fast until "Reset"
–
24
State "Released" = pulsating fast until "Silence Re-sound horn" or
"Reset"
KEY16
▼
25
State "Released" = pulsating fast until "Digit key 4" is pressed after
"Reset"
To Next Page
Loading...
