Siemens XC1003-A - 11 Programming the User Functions; Enabling Access Level 3; Enabling Access Level 4; Exiting Program Mode

Programming the user functions
68
Building Technologies A6V10099837_a_en
Fire Safety & Security Products 12.2007
11 Programming the user functions
Change the programming only if the default functions do not fulfill the local requirements.
11.1 Enabling access level 3
Accessible to persons authorized and trained by the manufacturer.
1. Reset all alarms and set the system to Operating level 2.
2. Hold down key "Silence Buzzer" and enter the code "14242321" by using the
keys "Digits 1 to 4".
 Continuous top-down flashing of the LED Block indicates "Programming"
mode.
11.2 Enabling access level 4
Accessible to persons authorized and trained by the manufacturer.
1. Reset all alarms and set the system to Operating level 2.
2. Unscrew the four allen screws on the front of the housing.
11.3 Exiting program mode
1. Press keys "Digits 1 and 4" at the same time.
 The LED block is no longer lit.
If no further key is pressed for more than 3 minutes, programming mode is automatically terminated