The basic equipment of the extinguishing control unit XC1003-A consists of
components 1 to 4. Depending on requirements, the control unit can be provided
with accessory parts 5 to 9:
1. FCP1004-E power supply unit with charger
2. XCM1001-1 main board (lower level)
3. XCM1001-2 main board (upper level)
4. Rechargeable batteries 4.5 Ah or 7.2 Ah (see chapter 7.4)
5. XCA1110 pyrotechnical actuator kit (option)
6. XCA1016 add-on module to split the monitored input 1 into the two separate
circuits "1A" and "1B" (option)
7. FCA1005-D RT isolation card for preventing remote transmission of alarms
and faults (option)
8. FDCI222 or FDCIO222 module for the connection to a fire detection system
(option)
9. Z3B171 relay module for fire controls (option)
10. Removable support main boards XCM1001-1 and XCM1001-2
11. DIN rail TS35 to install components such as relays, terminals, etc.
12. Label for indication of pre-discharge-warning time selected
To Next Page
Loading...
