Siemens XC1003-A - Page 71

Programming the user functions
71
Building Technologies A6V10099837_a_en
Fire Safety & Security Products 12.2007
Overview of the application settings (continuation)
Step Function Default
setting
Appl.
setting
Nr. 1
Appl.
setting
Nr. 2
Appl.
setting
Nr. 3
Appl.
setting
Nr. 4
Appl.
setting
Nr. 5
Appl.
setting
Nr. 6
Appl.
setting
Nr. 7
Deleted 1 1 1 1 5 1 1 1
Deleted 7, 9 7, 9 7, 9 7, 9 7, 9 7, 9 7, 9 7, 9
7
Deleted 11 11 11 11 11 11 11 11
Change the function of
monitored input 3
1 1 1 2 6 2 2 2
Suppress "Reset" upon stopped
activated time by the monitored
input 3
8 8 8 9 8 8 8 9
8
Change the fault processing of
the monitored input 3
10 10 10 10 11 10 11 10
Change the reaction aft
er "Reset"
of the detector zones 1 and 2
1 1 1 1 1 1 1 1
Change the reaction after
"Reset" of the detector zone 3
3 3 3 3 3 3 3 3
Change the reaction after "Reset"
of the detector zone 4 (manual
release)
6 6 6 5 6 6 5 5
Change the reaction after
"Reset" of the monitored input 1
8 8 8 8 8 8 8 7
Interlock the "Reset" function if
executed via control input 1
10 10 10 10 9 10 10 10
9
Interlock the "Reset" function 11 11 11 11 11 11 12 12
Change the indication of the
blocking states
1 1 1 2 1 1 2 1 10
Change active mode of indicator
"Released" (LED8)
3 3 3 3 3 3 3 4
Change the function of the
detector zones 1 and 2
1 1 1 1 1 1 1 1
Change the line fault processing
of the detector zones 1 and 2
6 6 6 6 6 6 6 6
11
Change the function of the
detector zone 3
9 11 11 9 11 9 10 10
Change the basic code for
access level 2
1 1 1 1 1 1 1 1 12
Change the access level for the
function "Silence buzzer"
4 4 4 4 4 4 4 4
Change the processing of "Fire
alarm condition"
1 1 1 1 1 1 1 1
Change the function of the key
"Silence buzzer" (KEY15)
3 3 3 3 4 3 3 3
Enable the function "Reminder
beep"
5 5 5 5 5 5 5 5
Enable the function "Fault to be
Reset"
7 7 8 7 7 7 7 7
Enable the function "RT-alarm +
RT-fault suppressed on access
level 2"
9 9 9 9 9 9 9 9
Enable the function "Reset via
control input 1 suppressed upon
RT-alarm"
11 11 11 11 11 11 12 12
Suppress the "Battery fault" 13 13 13 13 13 13 13 13
13
Change the active mode of the
buzzer in state "Emergency
hold/abort"
15 16 15 15 15 15 15 16
14 Change the fault delay upon
"Mains failure"
3 3 4 3 4 3 4 3
Change the function of control
input 2
1 1 1 1 1 1 1 1
Change the function of control
input 3
8 8 8 14 8 12 8 9
15
Change the function of control
input 4
15 15 15 15 15 15 15 15
Change the function of driver
output 2
1, 9 1, 9 1, 9 1, 9 1, 9 1, 9 1, 9 7, 8
Change the function of driver
output 8
10, 18 10, 18 16, 19 10, 18 16, 19 10, 18 16, 18 10, 19
16
Change the function of driver
output 1
20 20 20 20 20 20 20 21