SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
202
range>,<ipsec security parameter index (spi)>,<type of service (tos)
(ipv4) and mask / traffic class (ipv6) and mask>,
<flow label
(ipv6)>
[<CR><LF>+CGTFT: <cid>,<packet filter identifier>,<evaluation
precedence index>,<source address and subnet mask>,
<protocol
number (ipv4) / next header (ipv6)>,
<destination port
range>,<source port range>,
<ipsec security parameter index
(spi)>,<type of service (tos) (ipv4) and mask / tr
affic class (ipv6)
and mask>,<flow label (ipv6)>
[...]]]
OK
ERROR
Write Command Responses
AT+CGTFT=<cid>[,[<packe
t filter
identifier>,<evaluation
precedence index>[,<source
address and subnet
mask>[,
<protocol number
(ipv4) / next header
(ipv6)>[,<dest
ination port
range>[,
<source port
range>[,
<ipsec security
parameter index
(spi)>[,
<type of service (tos)
(ipv4) and mask / traffic
class (ipv6) and
mask>[,
<flow label
(ipv6)>]]]]]]]]]
OK
ERROR
Execute Command Responses
AT+CGTFT
OK
ERROR
Defined values
<cid>
a numeric parameter which specifies a particular PDP context definition (see theAT+CGDCONT
and AT +CGDSCONT commands).
<PDP_type>
(Packet Data Protocol type) a string parameter which specifies the type of packet data protocol.
IP Internet Protocol
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English