SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
215
<cid>,<Traffic class>,<Maximum bitrate UL>,<Maximum bitrate
DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate DL>,<Delivery
order>,<Maximum SDU size>,<SDU error ratio>,<Residual bit
error ratio>,<Delivery of erroneous SDUs>,<Transfer Delay>,
<Traffic handling priority>,<Source statistics descriptor>,
<Signaling indication flag>[…]]
OK
ERROR
Write Command Responses
AT+CGEQMIN=<cid>[,<Tr
affic class>[,<Maximum bit
rate UL>[,<Maximum bitrat
e DL>[,<Guaranteed bitrate
UL>[,<Guaranteed bitrate
DL>[,<Delivery order>[,<M
aximum SDU size>[,<SDU
error ratio>[,<Residual bit
error ratio>[,<Delivery of
erroneous SDUs>[,<Transfe
r delay>[,<Traffic handling
priority>[,<Source statistic
s descriptor>[,<Signaling in
dication flag>]]]]]]]]]]]]]]
OK
ERROR
+CME ERROR: <err>
Execution Command Responses
AT+CGEQMIN
OK
ERROR
Defined values
<cid>
Parameter specifies a particular PDP context definition.The parameter is also used in other PDP
context-related commands. The range is from 1 to 24,100 to 179.
<Traffic class>
0 – conversational
1 – streaming
2 – interactive
3 – background
4 – subscribed value
<Maximum bitrate UL>
This parameter indicates the maximum number of kbits/s delivered to UMTS(up-link traffic)at a
SAP.As an example a bitrate of 32kbit/s would be specified as 32(e.g. AT+CGEQMIN=…,32,…).
The range is from 0 to 11520. The default value is 0.
If the parameter is set to '0' the subscribed
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English