32 | Using radar
Operational modes
The radar’s operational modes are controlled from the NSE. The following modes are
available:
Off
The power to the radar scanner is turned off
Standby
The power to the radar scanner is on, but the radar is not transmitting.
Transmit
The scanner is on and transmitting signals to detect
surrounding targets.
It is possible to toggle the radar between transmit and
standby via the light dialogue.
If the radar is off or in standby mode you have the option to
turn the radar on or off from the radar screen.
Setting up the radar image
Positioning the radar center
You can move the radar center to different positions within the radar panel.
The following options are available:
Center
Default setting. The radar center is centered on the radar panel.
Look Ahead
Moves the radar center to the bottom of the panel to give maximum view ahead.
Offset
Allows you to move the center to any location on the radar panel.
1 Select the offset option
2 Use the arrow keys to position the radar center
3 Tick key
Center Look ahead Custom
PWR
MENU WIN
MENU WIN
MENU WIN
To Next Page
Loading...
Need help?
General
