Simrad NSE12 User Manual

Navigating | 73
11 Navigating
The navigation function included in the NSE allows you to navigate towards the cursor
position, a position defined by latitude and longitude values, a waypoint or along a
predefined route.
For information about positioning waypoints and creating routes, refer the Waypoints,
Tracks and Routes section.
Start navigating
Using the GOTO key
You can start navigation from any panel by pressing the GOTO key. The go to cursor
option will only be available when the cursor is active on a Chart, Radar or Echosounder
panel.
Using the cursor
You can start navigating a route on a chart panel by moving the cursor over the route
and then pressing the MENU key.
MENU WIN
Selecting start point
You can navigate a route starting from any waypoint by positioning the cursor over the
selected waypoint and pressing the MENU key.
MENU WIN
Cancel navigation
You cancel navigation by pressing the GOTO key.
PLOT GO TO
MARK VESSEL
PLOT GO TO
MARK VESSEL

Simrad NSE12 Specifications

General

Brand	Simrad
Model	NSE12
Category	Monitor
Language	English