Video | 95
19 Using video
The video function allows you to connect optional cameras to your NSE system.
The video images will not be shared with other NSE units via the network!
The video panel
The video panel is accessed via the INFO key.
INFO
x2
The video panel can also be set up in one of the other page groups accessed by the DAK
keys. It can be set up as single panel or as one of the panels in a multi-panel page.
The video image will be proportionally scaled to fit into the video panel. Area not covered
by the image will be colored black.
If a multi-panel page layout is selected for the video image, it is recommended to
adjust the panel size to fit the image size. For how to adjust panel size, refer to the
Customizing your NSE system section.
The graphics below show images from a thermal imaging camera.
Customizing your video settings
Selecting video source
NSE supports two video input channels. You can select to view one channel only, or to
cycle the image between available video cameras.
The cycle period can be set from 5 to 120 seconds.
Mirroring the video image
Video input can be set to display a mirror image. This setting can be helpful for rear-
facing cameras used to back-down the vessel.
MENU WIN
To Next Page
Loading...
Need help?
General
