40 | Other vessels on chart and radar image
How to display other vessels
Selects which targets to display.
Sets the length of the extension line for your
vessel and for other vessels.
The length of the extension line indicates the
distance the vessel will move in the selected
time period.
Selects how to use the extension line to
indicate speed and course for targets; either
as true motion in the chart or relative to your
vessel.
Sets the orientation of the AIS icon; either
based on heading or COG information.
Receiving MMSI messages
You need to have your own MMSI number entered in the NSE
system to be able to receive addressed messages from AIS and
DSC vessels.
The Vessel message option in the alarm settings must be toggled
on if any MMSI message shall be displayed, refer to next page.
You can define an invisible guard zone around your vessel. When a target comes within
this distance from your vessel, the symbol will change to the “dangerous” target symbol.
An alarm will be triggered if activated in the Alarm settings panel.
MENU WIN
x2
To Next Page
Loading...
Need help?
General
