BEP CZone | 83
15 BEP CZone
The NSE system intergrate with BEP’s CZone system used for controlling and monitoring
a distributed power system on your vessel.
A separate manual will be provided with your CZone system. Refer to this documentation
and to the NSE Installation manual for how to install and configure the CZone system.
The BEP CZone panel
When the CZone system is connected and configured, the CZone icon will be available
on the Pages panel. This icon gives access to the CZone panel, providing icons for ZCone
modes and system overview.
PAGES
CZone modes
The CZone modes provide a one press functionality that allows multiple circuits to be
controlled efficiently. The modes are configured during installation of the system.
All available modes will be displayed on the CZone panel.
If there are more than 6 modes configured on screen the rest of the modes will move to
a page shown under the More Modes option.
To Next Page
Loading...
Need help?
General
