34 | Using radar
Dual Radar
With dual radar capability in NSE it is possible for two radar sources to be displayed
simultaneously. Connect either two Broadband Radars or two Pulse Radars and see both
radar images at the same time.
Interference while using Broadband Radar™ on most ranges will be seen when a pulse
radar and a Broadband Radar™ are transmitting at the same time on the same boat. It is
Navico’s recommendation to only transmit one radar at a time: e.g. Broadband Radar™
at a distance, and to trigger Racons.
Set the radar screen to show two radar panels.
Highlight a radar panel and select which radar you require from the sources menu.
Fast scan (Broadband Radar™ only)
Increases the speed of the radar scanner when the range is set to 2 nm or less. This
option gives faster updates on target movements within this range.
STC curve (Broadband Radar™ only)
The STC (Sensitivity Time Control) controls the sensitivity of the radar
signal close to your vessel. The STC curve option has 3 settings. Your
selection should be based on the current sea conditions.
RADAR
MENU WIN
MENU WIN
MENU WIN
To Next Page
Loading...
Need help?
General
