Sirona Intego - Page 150

64 57 316 D3543
150 D3543.076.01.04.02 06.2015
10Service and configuration of the treatment center Sirona Dental Systems GmbH
10.3Service settings with EasyTouch user interface Service Manual INTEGO / INTEGO pro
10.3.2.6.1 Software version
➢ (A) displays the full software status of the treatment unit.
If the software version is in brackets, at least one component is not at
the latest software status.
Update the treatment unit's software via SD card or DUMC (see
Installing the treatment center software [ → 17]).
➢ (B) displays the serial number of the treatment unit.
➢ (C) displays the board designation.
➢ (C) displays the board's hardware version.
10.3.2.6.2 Patient chair service information
✔ If the field is orange, the option has been detected.
➢ (A) Drive for increased patient weight
➢ (B) Power connection
➢ (C) Cross foot switch
➢ (D) Electronic foot switch C+
10.3.2.6.3 Dentist element service information
✔ If the field is orange, the option has been detected.
➢ (A) First motor
➢ (B) Second motor
➢ (C) Third drill drive
➢ (D) Apex locater
➢ (E) Ultrasonic device
➢ (F) Polylight
➢ (G) Therapy
➢ (H) No light supply
➢ (I) Light supply from DAR
➢ (J) Light supply from DAI