64 57 316 D3543
D3543.076.01.04.02 06.2015
99
Sirona Dental Systems GmbH 7Replacing components
Service Manual INTEGO / INTEGO pro 7.2Removing the cover
båÖäáëÜ
7.2.2 TS dentist element
7.2.2.1
Removing the arm cover sections
1. Pry open the covering on the front joint cover and remove it.
2. Unscrew the two screws completely and take off the bottom half of
the cover.
3. Remove the top half of the cover by pulling it up.
4. Follow exactly the same procedure to remove the rear joint cover.
5. Pull the front cover sections off the support arm.