64 57 316 D3543
D3543.076.01.04.02 06.2015
25
Sirona Dental Systems GmbH 5Important information
Service Manual INTEGO / INTEGO pro 5.4S-COM
båÖäáëÜ
5.4
S-COM
5.4.1 General
S_COM
On the S-COM, the PC software functions are performed for the user
interface and the user interface software is downloaded via FTP.
If the S-COM connection has been established, the S-COM LED lights up
on the DSA and on the DAK. If this LED is flashing, the connection is
being established or a malfunction has occurred. However, there is a line
connection. If the LED is off, there is no data connection. In this case, it
must be assumed that there is a disruption in the line.
The board DAT has a 100 Ohm terminating resistor for the S-COM so that
the line is closed if a board DAK is not fitted.
To Next Page
