64 57 316 D3543
D3543.076.01.04.02 06.2015
23
Sirona Dental Systems GmbH 5Important information
Service Manual INTEGO / INTEGO pro 5.3CAN BUS
båÖäáëÜ
5.3
CAN BUS
5.3.1 General
CAN
The CAN runs all controllers of the treatment center, all software updates,
and all service support cases.
S_COM
On the S-COM, the PC software functions are performed for the user
interface and the user interface software is downloaded via FTP.
Query and S etup dialog box
After the treatment center is switched on, all components and software
are queried and displayed in the setup dialog.
Error due to missing connection to the central error log
The error LED of any node that loses its CAN connection to the central
error log on the DSA board flashes cyclically 2x. Check the CAN
connection in this case.
To Next Page
Loading...
