Cab and Covers
4-12
31211015 6036, 6042, 8042, 10042, 10054
Note: The local JLG dealer or certified air conditioning service
center or personnel to perform the refrigerant installation to
the system.
12. Properly connect the battery. Refer Section 9.8,
“Battery”, for procedure.
13. Start engine, run it briefly at low idle and check machine
for any visual sign of fluid leakage.
Note: STOP engine immediately if any leakage is noted, and
make any necessary repairs before continuing.
14. Wait for engine to cool and check coolant level. Add
coolant as required to bring coolant to proper level.
15. Wait for engine to cool and check coolant level. Add
coolant as required to bring coolant to proper level.
16. Check the operation of cab heater and A/C.
17. Shut the engine OFF.
18. Close and secure the engine cover.
19. Remove Do Not Operate Tag from ignition key switch
and steering wheel.
To Next Page
