General Information and Specifications
2-44
31211015 6036, 6042, 8042, 10042, 10054
2.9.8 Assembly Instructions for Bulkhead (BH)
Fittings
1. Ensure that threads and surface are free of rust, weld
and brazing splatter, splits, burrs or other foreign
material. If necessary, replace fitting or adapter.
2. Remove the locknut from the bulkhead assembly.
3. Insert the bulkhead side of the fitting into the panel or
bulkhead bracket opening.
4. Hand thread the locknut onto the bulkhead end of the
fitting body.
5. Torque nut onto fitting while using the Double Wrench
Method.
To Next Page
Loading...
