General Information and Specifications
2-8
31211015 6036, 6042, 8042, 10042, 10054
If Equipped for LS
Note: *Friction Modifier may be added to axle differentials, see Section 2.4, “Fluid and Lubricant Capacities”.
Compartment or System Type and Classification Viscosities
Ambient
Temperature Range
°F °C
Min Max Min Max
Engine Crankcase
API CI-4 Multigrade
CES-20078
SAE 0W-30 -20 0 -29 -18
SAE 5W-30 -15 70 -26 21
SAE 10W-30 -9 70 -22 21
SAE 15W-40 5 120 -15 49
Transmission and Transfer Case
Mobilfluid 424 10W-30 15 120 -10 49
MobilFluid LT 75W-80 -20 15 -29 -10
Refer to ZF TE-ML-03 for additional fluids.
Axle Differential and Wheel End
MobilFluid 424 10W-30 15 120 -10 49
Mobilfluid LT* 75W-80 -20 15 -29 -10
API GL4 with LS Additives
or
API GL5 with LS Additives
75W-90 -20 114 -29 45
Hydraulic System
MobilFluid 424 10W-30 15 120 -10 49
Exxon Univis HVI 26 -20 120 -29 49
Boom Wear Pad Grease Extreme Pressure Grease NLGI Grade 000 -31 122 -35 50
Grease Fittings Extreme Pressure Grease
NLGI Grade 2 EP
or
NLGI Grade 3 EP
with Moly
Additive
5122-1550
Boom Chain Lubricant Gear Oil 80W-90 -40 115 -40 46
Engine Coolant
Ethylene Glycol
and Water
50/50 Mix Standard
60/40 Mix Cold Weather
Fuel
EN590
ASTM D975 Grade 2-D
ASTM D975 Grade 1-D
(Maximum B5 Biodiesel)
Low Sulfur
(S <
500 mg/kg)
Brake Fluid
(SN 0160074878 to Present)
Mobil ATF-D/M -20
114 -29 45
Air Conditioning Refrigerant R-134A Tetrafluoroethane
To Next Page
