Smart Electronic CX20 - Software Update; Update via USB

Basic Operation
22 smart CX20
5.2 Software Update

Once you have put your CX20
into operation, you
should first update the operating software of your
receiver!
5.2.1 Update via USB
If you have Internet access, you should update your receiver via the USB
interface.
1. Search for the upgrade file on the internet page www.avanit.tv (menu
item Support).
2. If the version number of the update file matches with the version num-
ber of the software of the smart CX20, which is displayed in the sub-
menu Information of the menu Tools, you do not need to do anything
else. Your receiver is up to date Otherwise continue with step 3.
3. Save the update file to a USB data storage.
4. Unpack the file with the ending .abs.

Please note that the upgrade file (*.abs) is copied direct-
ly to the root directory of the USB data storage (
no
subdirectory)!
5. Connect the data storage to your receiver.
6. In the menu
Tools, select the sub-menu Upgrade by USB and press
OK.
7. At Upgrade Mode, select the upgrade mode Allcode by using the
keys / and / .
8. At Upgrade File, select the file copied in step 2.