Smart Electronic CX20 - Software Update via Satellite

Basic Operation
smart CX20 23
9. Select the Start button and
confirm by pressing
OK
. The
message on the right will be
displayed.
The upgrade will be performed
after selecting Yes
by using the
keys / and / and
pressing
OK
. Then, the receiver will
automatically perform new start.
5.2.2 Software Update via Satellite
smart can also upload the update file on the satellite Astra 19.2° E. You
can then perform a so-called OTA
8
update:
1. In the menu Tools, select the submenu OTA Upgrade.
2. Leave all settings unchanged (factory settings).

The option of software update via satellite is only possi-
ble via Astra 19.2°E. Correspondingly, all settings
should be left unchanged in the status as preset by
smart:
Line
Target value
Satellite
(1/1) Astra 19.2°E
Transponder
(61/84) 12604 H 22000
Frequency
12604
Symbol rate
22000
Polarization H
Download PID
343
3. Mark the button Start by using the keys / PR+ and / PR-, and
confirm by pressing OK.
Now it is being checked if the software currently installed on the re-
ceiver is up-to-date. If it is not up-to-date, then the current software
8
OTA = Over The Air = via Satellite