60 smart CX20
7.2.5 Multi Satellite
Multi Satellite differs from Single Satellite by the fact that all satellites
marked in the satellite list are scanned for receivable channels.
7.2.6 Editing the Transponder List
In the sub menu TP List you can edit the transponder list (TP list), which is
used for example for the standard scan. Beside that you can search for a
program broadcasted via a certain transponder.
Press the red function key to change the selected transponder (Fre-
quency, Symbol Rate, and Polarization).
Press the green function key to add a transponder to the transponder
list.
Press the yellow function key to delete the selected transponder from
the transponder list.
Press OK or the blue function key to search for channels broadcasted
via the selected transponder. The channels found are appended to the
existing channel list.
7.3 Menu System Setup
7.3.1 TV System
Here you can make several settings to the signal format at the audio and
video outs.
In the menu System Setup, select the sub-menu TV System and con-
firm by pressing
OK.
7.3.1.1 Video Resolution
1. Select the Video Resolution.
2. Press OK to display a list with the selectable values.
3. Select the value appropriate to your TV set by using the keys / PR+
and / PR-.
Example: If your TV set is capable of displaying a resolution of 720p
18
18
p = progressive scan: progressive scan images are transmitted, e.g. 720p means that 50
progressive scan images with a resolution of 1280 pixel/line and 720 lines/image are trans-
mitted per second.
i = interlaced video: odd and even lines are transmitted alternatingly.
To Next Page
Loading...
