Smart Electronic CX20 - OSD Setting; Hide OSD; OSD Transparency; Other

Extended Settings and Functions
64 smart CX20
7.3.3 OSD
20
Setting
7.3.3.1 Hide OSD
 Using the keys / and / , set the number of seconds after
which the OSD should be hidden. You may set values from
1 to 10 se-
conds
.
Default value is
5 s (factory setting).
7.3.3.2 OSD Transparency
 Select transparency of the on-screen menu by using the keys /
and / .
You may set values from
0% (OFF) (no transparency) to 40% (almost
transparent). Default value is
OFF .
7.3.4 Other
7.3.4.1 LNB supply voltage
 Select LNB Power, to switch on /off the LNB supply voltage at LNB
IN using the keys / and / .

Based on currently valid EC regulations, this receiver is
equipped with an energy saving system. After three
hours, the receiver will automatically switch to energy
save mode (energy consumption of less than 1 W) un-
less a function is triggered via remote control during
such period (e.g. volume change or switching of chan-
nels). You can deactivate the automatic standby func-
tion via the menu.
7.3.4.2 Automatic Standby Function
 Select Auto Standby to switch on or switch off the automatic standby
function, using the keys / and / (factory setting is Auto
Standby
On ).
20
OSD = On Screen Display