ing the receiver!
Always disconnect mains plug from power outlet before
cleaning.
Never clean the receiver using a damp cloth.
Always ensure that no liquid enters the receiver.
cleaning the receiver!
Do not use solvent-containing cleaning agents like pe-
troleum ether or thinner.
Clean the housing of the receiver using a dry cloth.
10 Transport and Decommissioning
Proceed as follows if you want to transport the receiver of if you do
not want to use the receiver any more:
1. Disconnect the receiver and all connected devices from power supply.
2. Disconnect any cables connected to the receiver.
3. Remove the batteries from the remote control.
4. Put receiver, cables and remote control into the original packaging.
5. Store the receiver and the accessory parts at a dry and dust-free loca-
tion.
6. Protect the receiver from freeze.
To Next Page
Loading...
