Smart Electronic CX20 - Direct Programming - Timer Setting

PVR / Recording
44 smart CX20
6.3 Direct Programming - Timer Setting
The submenu System Setup / Timer Setting can be used to program,
edit and delete up to eight different recordings.
1. In the submenu Timer Setting, mark a timer by using the keys PR+
and PR-.
2. Press OK to open the timer.
3. Mark the line Timer Mode by using the keys PR+ and PR-.
4. You can select from the following possibilities by using the keys
and :
Value Meaning
Off
The timer is deactivated.
Once
Single event (only once).
Daily
Event occurs every day at the same time (e.g. the news pro-
gram every day)
Weekly Event always at the same weekday
Monday to Friday
Event Monday to Friday at the same time.
5. Mark the line Timer Service by using the keys PR+ and PR-.
Select the option
Record by using the keys and :
6. Mark the line Wakeup Channel by using the keys PR+ and PR-, and
select the channel to be recorded or displayed by using the keys
and .
7. Mark the line Wakeup Date by using the keys PR+ and PR-, and enter
the date by using the numeric keys.
8. Mark the line On Time by using the keys PR+ and PR-, and enter the
on time by using the numeric keys.
9. Mark the line Duration by using the keys PR+ and PR-, and enter du-
ration of the program by using the numeric keys.

You can go from letter to letter (position to position) in
the date and time fields by pressing the keys and
.