Extended Settings and Functions
smart CX20 53
2. Select by using the keys / and / if a
Fixed Antenna
or a
Motor Antenna
is connected to the receiver.
3. Press EXIT to leave the submenu Antenna Connection.
4. Press EXIT again to leave the menu Installation and to return to TV
operation, or go to another submenu.
If you selected a
Motor Antenna
, then such antenna
should be further configured at the menu item Antenna
Setup.
7.2.2 Satellite List
The submenu Satellite List states a preset list of possible satellites. De-
pending on your antenna system you can select the satellites used for
receiving channels:
1. In the menu Installation, select the submenu Satellite List and confirm
by pressing
OK.
2. Select the satellite you want to receive by pressing the keys / PR+
and / PR-, and confirm by pressing
OK.
The selected satellite will be correspondingly marked ( ).
You may also edit the satellite list by se-
lecting one of the buttons on the right
edge of the menu window.
To change an entry:
1. Press the red function key (SHIFT).
2. Select by pressing the keys / PR+ and / PR- if you want to
change name or longitude (position).
3. Select the text position to be changed by pressing the keys /
and / :
− Enter the numbers and letters using the numeric keys of the remote
control.
− Press the red function key
(SHIFT) to switch between upper case
and lower case.
To Next Page
Loading...
