Smart Electronic CX20 - Fixed Antenna

Extended Settings and F
unctions
smart CX20 55
7.2.3.1 Fixed Antenna
 At Satellite, select the satellite to which the following settings should
apply.

The options are limited to such satellites that are
marked in the Satellite List as such satellites from
which you want to receive channels.
 At LNB Freq, select the value corresponding to the used LNB. Alterna-
tively, press
OK, select the corresponding value from the list, and con-
firm by pressing
OK.
Possible values LNB frequency (MHz)
5150
10600
Universal (9750 - 10550)
5750
10700
Universal (9750 - 10600)
5950
10750
Universal (9750 - 10700)
9750
11250
Universal (9750 - 10750)
10000 11300 Universal (9750 - 10600)
10050
5150 - 5750
Unicable (9750 - 10600)
10450
5750 - 5150
Unicable (10200)
A universal LNB with 9750 - 10600 MHz is the default value.
You can set signal strength and signal quality for receiving of a certain
transponder:
 At Transponder, select the tran-
sponder for which signal strength
and signal quality should be dis-
played at the lower window edge by
using the keys / and /
(or select Transponder, press
OK,
select the desired transponder from
the list and confirm by pressing
OK
).