Extended Settings and Functions
smart CX20 61
then you should also set 720p at the receiver (720p is the factory set-
ting).
If receiver and your TV set are connected via a SCART
cable, then max. resolution is 576i (PAL format).
7.3.1.2 Aspect Ratio
Select Aspect Mode to set the aspect ratio by using the keys /
and / .
Auto Default setting: the receiver selects optimum value
4:3PS For playback with a 4:3 screen, PS = Pan & Scan:
• 4:3 program: picture is optimally displayed.
• 16:9 program: picture height is adjusted to screen; picture in-
formation on the right and left are missing.
4:3LB For playback with a 4:3 screen, LB = Letterbox
• 4:3 program: picture is optimally displayed.
•
16:9 program: picture width is adjusted to screen; lacking height
is filled up by black bars.
16:9 For playback with a 16:9 TV set
7.3.1.3 Format of the Digital Audio Signal
Select Digital Audio Out to set the format of the digital audio signal by
using the keys / and / :
PCM
– Pulse Code Modulation (default),
DD
– Dolby Digital (multi-channel audio).
For programs broadcasted in DD format, select DD if
you have a connected DD-compatible multi-channel
amplifier or a DD-compatible home cinema system, or if
your TV set is capable of processing DD signals.
To Next Page
Loading...
