Smart Electronic CX20 - Page 63

Extende
d Settings and Functions
smart CX20 63
Value
Meaning
Record
The programmed program will be recorded on the USB data
storage.
Turn off
The receiver switches at the programmed time from the opera-
ting mode to the standby mode.
Channel
The programmed program will be displayed on the screen, but
NOT recorded.
6. Mark the line Wakeup Channel by using the keys / PR+ and
/ PR- and select the channel to be recorded or displayed by using
the keys / and / . The line Wakeup Channel is deac-
tivated when Timer Service is set to
Turn off.
7. Mark the line Wakeup Date by using the keys / PR+ and / PR-,
and enter the date by using the numeric keys.
8. Mark the line On Time by using the keys / PR+ and / PR-, and
enter the on time or the time when the receiver should switch from the
operating mode to the standby mode by using the numeric keys.
9. Mark the line Duration by using the keys / PR+ and / PR-, and
enter duration of the program by using the numeric keys. The line
Duration is deactivated when Timer Service is set to
Turn off.

You can go from letter to letter (position to position) in
the date and time fields by pressing the keys /
and / .
10. Mark the button Save by using the keys / PR+ and / PR-, and
confirm by pressing OK (or select Cancel and confirm by pressing OK
if you want to cancel programming – then you will return to the sub-
menu Timer Setting).

You can directly add programs marked in EPG to the
timers. This significantly facilitates programming as you
do not have to make settings for channel, date and
time.