smart CX20 25
What is RAPS?
Currently, the satellites Astra 19.2° and 23.5°, Eutelsat Hot Bird 13° East,
Eurobird 9° and Turksat 42° offer a four-digit number of digital TV and
radio channels.
At delivery, state-of-the-art satellite receivers have all important channels
already stored. But what happens after that? New and interesting chan-
nels are added almost weekly, and there are channel changes time and
again.
Updating the channel list with a present receiver is not quite easy for most
users. When performing a channel search, invalid data are not deleted,
and usually the new channels are just added at the end of the list; this
requires time-consuming reprogramming of the channel list.
The RAPS system of your CX20 automatically performs such program-
ming work.
The window RAPS Automatic Installation is the second window of the
installation process.
Every time you switch off your receiver, RAPS checks whether there are
any changes with the channel lists (RAPS scan). This only takes a few
seconds.
In case of changes, the new data are automatically included into the new
channel list (RAPS download) and displayed in a table. If a channel
changes the receive parameters, then this is automatically updated by
RAPS. In case of new channels, such channels are added. If channels are
permanently discontinued, then the corresponding channel number is
deleted.
However, new channels are not only added, but allocated to logic blocks,
correspondingly enabling easier finding. That is why certain areas may
remain free. Example: For Germany, there is the basic list as well as the
areas Third Channels, Info+Sports, Special Interest, Local TV, as well as
News starting at channel number 100 and many Music Channels starting
at channel number 123.
To Next Page
Loading...
