SMC Networks EX600-SEN3 - Page 34

-33-
No.EX※※-OMS0027
L/A IN or L/A OUT
LED is ON or OFF.
MS or NS LED is
other than green ON.
Red ST(M) LED is ON.
Or red/green ST(M)
LED is flashing alternately.
Red PWR or PWR(V)
LED is ON.
SI unit
Red ST(M) LED is flashing.
Refer to Fault 8.
Refer to Fault 9.
Refer to Fault 10.
The digital input or output
device does not work
correctly.
The analogue input or
output device does not
work correctly.
The valve does not
work correctly.
Contact SMC.
Refer to Fault 13.
Refer to Fault 14.
Refer to Fault 15.
Refer to Fault 11.
Refer to Fault 12.